587,833 active members*
3,173 visitors online*
Register for free
Login

Thread: Solidcam boundary problem

Results 1 to 2 of 2
  1. 02-06-2016, 09:34 AM #1
    guchikas
    guchikas is offline Junior Member
    Join Date
    Sep 2014
    Posts
    2

    Solidcam boundary problem

    Hi
    does anyone has problems with boundaries ? it doesn't matter what i pick, internal,external, centered, tangent...it always work inside of the boundary..... any ideas why ?
    Added some pictures to show the problem. boundary (green profile )
    As you can see tool works inside of the part in both cases, but in external it should work only outside of the boundary (green profile )
    Attached Thumbnails Attached Thumbnails internal.jpg   external.jpg  
    Last edited by guchikas; 02-06-2016 at 09:36 AM.
    Reply With Quote Reply With Quote
  2. 02-13-2016, 12:02 PM #2
    Paul Wood
    Paul Wood is offline Registered
    Join Date
    Jan 2014
    Posts
    0

    Re: Solidcam boundary problem

    There's a box call silhouette that shows on certain options and if you look at this video it shows how to change direction at about 10minutes in
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules