[3DRevEng]

We are selling our LMI scanner (3D3solutions HDI R2) Comes with 9mm, 16mm, 25mm lenses Rotary table up to date software and dongle.

3D3Solutions USED DEMO HDI R2 White light Scanner for sale | 3D Reverse Engineering

New systems start at $19,999.00 USD(one lense set, no rotary table)

This one including Rotary table, Color caputure, 3 lense sets, 15mm calibration board, $15,000.00 USD
Software is still under maintenance.

[3DRevEng]

Added pictures to the link here. http://www.3dreveng.com/demo-3d3solu...stem-for-sale/

Asking price is $13,500.00 USD

This is a whitelight system capable of capturing 2 million points in 2 seconds and is easily upgradable to 3mp or 5mp cameras. When comparing scanners this is not an entry level or hobby type unit. This unit can capture with accuracy of .001 to .006 depending on the field of view and calibration. This scanner has been proven to be able to scan coins to cars and even people. This unit is the s

Similar high end units like Steinbichler, ATOS and Breuckmann scanners use the same type of technology!

What is included!
HDI R2 System for sale
Complete with the following
15mm Calibration board
25mm , 16mm , 9mm lenses
Point Grey 2mp firewire cameras
License dongle and Flexscan 3.2
Color capture (DSLR camera extra)
Rotary Table
Software Licencee includes
Advance Scanners: 2
Rotary Tables
Photogrammetry
Deviation Analysis
Exporting Scans
Attachment 218990

[xcode]

Dear sir;
we wanna to know more information about ur used 3d scanner R2X or R3X or R4X and its final price, also we need a clear life pics for him from all sides and for its original packaging ., also a life video for it from the frist sec. starting the system
plz tell us about its final price
plz cantact at x_code2004@yahoo.com

[xcode]

Dear sir;
we wanna to know more information about ur used 3d scanner R3X or R4X and its final price, also we need a clear life pics for him from all sides and for its original packaging ., also a life video for it from the frist sec. starting the system
plz tell us about its final price
plz contact at x_code2004@yahoo.com

[awerby]

That post was from more than 2 years ago, so it's unlikely that used system is still for sale. But if it is, the price may have gone down...

[InMesh]

Yes there are also better systems on the market.

[milo3dprinter]

i've got the used flexscan3d 3.3.5.8 activate by dongle USB for sell.the price is only 1.000usd.please contact to me if you are interested in throught yourscan3d@gmail.com

[milo3dprinter]

please check my 3d scanner in action :
https://www.youtube.com/watch?v=v9c2UqzWuTA&spfreload=5
here is the link to download the software :
https://drive.google.com/file/d/0Bze...ew?usp=sharing
without the usb dongle or installation key,you can not log in to the software

[bestellen]

Yes there are also better systems on the market.