587,765 active members*
3,521 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > AMADA RG80 / 9EX backstops losing sizes

Thread: AMADA RG80 / 9EX backstops losing sizes

Results 1 to 2 of 2
  1. 05-22-2018, 10:09 AM #1
    SDesigns
    SDesigns is offline Registered
    Join Date
    Jun 2009
    Posts
    52

    AMADA RG80 / 9EX backstops losing sizes

    Hi,

    I'm hoping someone can offer some insight into a problem with our Amada RG80 press brake.
    The machine is equiped with a 9EX control.

    When a bend is programmed, the size comes out correctly for the first bend. Thereafter, the backstops tend to drift around 0.2 of a mm for each bend thereafter. By the time five bends are completed, the backstops are around a millimeter off.

    Any idea what could be causing this?
    Reply With Quote Reply With Quote
  2. 05-23-2018, 08:54 PM #2
    AMADAJOE
    AMADAJOE is offline Member
    Join Date
    Mar 2009
    Posts
    101

    Re: AMADA RG80 / 9EX backstops losing sizes

    Your voltage to encoders is dropping. You need board below.

    https://www.altparts.com/solr/index/?q=Nc9ex-s2854-b
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Need urgent help with Amada Apelio II 357 05PLA and Amada Pega 244 04PC
    By Barbwier in forum Fanuc
    Replies: 2
    Last Post: 04-23-2022, 04:55 AM
  2. fractional sizes
    By Anniepoo in forum Solidworks
    Replies: 6
    Last Post: 06-18-2015, 04:06 PM
  3. Intermac Master43 keeps placing the backstops over and over...
    By n_duquette in forum Glass, Plastic and Stone
    Replies: 1
    Last Post: 01-16-2014, 04:10 PM
  4. Different Sizes
    By SCHootie in forum Stepper Motors / Drives
    Replies: 1
    Last Post: 02-20-2007, 07:29 AM
  5. stepper sizes
    By DDM in forum DIY CNC Router Table Machines
    Replies: 5
    Last Post: 11-30-2003, 02:35 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules