Can anyone help me with locating the primary and secondary windings on this tranformer?
http://cgi.ebay.com/Toshiba-2550-TR-...ayphotohosting
Thread: Tranformer Inquiry
Results 1 to 3 of 3
-
06-29-2007, 06:33 PM #1
Registered
- Join Date
- Nov 2006
- Posts
- 296
Tranformer Inquiry
-
06-29-2007, 06:49 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24260
I would think the Blue/Mauve/white are the secondaries, in the absence of any further info It would be easier to find out with a meter etc.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
07-03-2007, 01:17 AM #3
Registered
- Join Date
- Nov 2006
- Posts
- 296
Thanks Al, it seems you are right, i got a guy take it home and look at it, he told me he got the primaries figured out, so tonight he'll look at it again to find out where the "common" is, you see it has three outputs, 26.5v/9amps, 10.5v/5amps and 100v/1.5amps, said he'll label them for me.
Reply With Quote
Similar Threads
-
Tranformer schematics?
By CNC Pro in forum FanucReplies: 10Last Post: 08-14-2012, 05:05 AM -
RFQ Inquiry
By daveboyd in forum Employment OpportunityReplies: 4Last Post: 03-10-2007, 06:48 AM -
Cutting table : inquiry
By smartcut in forum Laser Engraving / Cutting Machine General TopicsReplies: 0Last Post: 10-20-2006, 06:58 AM -
Bridgeport VMC Inquiry
By NC Cams in forum Bridgeport / Hardinge MillsReplies: 2Last Post: 09-15-2006, 03:02 PM -
Tranformer input options?
By Bloy2004 in forum CNC Machine Related ElectronicsReplies: 6Last Post: 05-01-2005, 04:17 PM
Posting Permissions
