So I’ve just got this Fanuc Robodrill after it’s sat for years, after powering it up, I got alarms for battery and all 3 axes needing to relearn home position. Replaced battery, powered off and back on, that solved the battery alarms, but now trying to relearn the axis positions, I got Y and Z to cooperate rather easily, but each time I try X I manually move to the position, with the two diamonds aligned, and hit the soft key 3x as instructed, and after the third press of the soft key it moves (negative) in X until it hits the hard limit and alarms due to servo over torque. I’ve repeated the process multiple times, with the same result. Do I have a bad limit switch or something? Searched the forum and google several times with nothing quite matching my needs. Thanks!