603,858 active members*
7,427 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc O-MD,ATC NOT FUNCTIONAL, PARAMETERS LOST
Results 1 to 12 of 12
  1. #1
    Join Date
    Jan 2019
    Posts
    33

    Fanuc O-MD,ATC NOT FUNCTIONAL, PARAMETERS LOST

    HI EVERY ONE....
    AS IM A NEW ONE IN CNC MACHINING IM FACING LOTS OF PROBLEMS.HERE I COME WITH A NEW PROBLEM. MY FANUC O-MD CONTROLLER, CNC MILLING LOST IT PARAMETERS. I RECOVERED ALMOST ALL BUT I FOUND THAT ALL MACRO PROGRAMS ARE LOST AS WELL. THE PROBLEM IS ABOUT ATC WHICH IS NOT WORKING RIGHT NOW AND I DONT HAVE ANY MACRO PROGRAMS FOR THIS.
    NEED YOUR HELP PLZ...

  2. #2
    Join Date
    Dec 2009
    Posts
    1121

    Re: Fanuc O-MD,ATC NOT FUNCTIONAL, PARAMETERS LOST

    Hey,please send us some info about machine type,,model,who is the manufacturer and we try to help.
    Good luck

  3. #3
    Join Date
    Jan 2019
    Posts
    33

    Re: Fanuc O-MD,ATC NOT FUNCTIONAL, PARAMETERS LOST

    @zavateandu...thanks dear. The machine manufacturer is Sunlike Machine Tools Corp. Taiwan. Its Model is PV 500,vertical machining center. Controller is FANUC O-MD.

  4. #4
    Join Date
    Dec 2003
    Posts
    24260

    Re: Fanuc O-MD,ATC NOT FUNCTIONAL, PARAMETERS LOST

    Is the MTB still around, If so you should be able to obtain them from them.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  5. #5
    Join Date
    Dec 2009
    Posts
    1121

    Re: Fanuc O-MD,ATC NOT FUNCTIONAL, PARAMETERS LOST

    Quote Originally Posted by machining214 View Post
    @zavateandu...thanks dear. The machine manufacturer is Sunlike Machine Tools Corp. Taiwan. Its Model is PV 500,vertical machining center. Controller is FANUC O-MD.
    Hey
    is your machine arm ATC or umrella type ATC?
    can you post a picture?
    thanks

  6. #6
    Join Date
    Jan 2019
    Posts
    33

    Re: Fanuc O-MD,ATC NOT FUNCTIONAL, PARAMETERS LOST

    i went through few posts over here and checked that my parameter 230-239 are zero and parameter 40 bit 5 is 1... further more i cant find programs like 09000 or O9001. When i tried to enter a macro program O9000 alarms shows illegal program no.

  7. #7
    Join Date
    Jan 2019
    Posts
    33

    Re: Fanuc O-MD,ATC NOT FUNCTIONAL, PARAMETERS LOST

    my machine atc is umbrella type 16 tools atc...
    Attached Thumbnails Attached Thumbnails used-cnc-milling-machine-500x500.jpg  

  8. #8
    Join Date
    Jan 2019
    Posts
    33

    Re: Fanuc O-MD,ATC NOT FUNCTIONAL, PARAMETERS LOST

    MTB not replying

  9. #9
    Join Date
    Dec 2009
    Posts
    1121

    Re: Fanuc O-MD,ATC NOT FUNCTIONAL, PARAMETERS LOST

    Quote Originally Posted by machining214 View Post
    i went through few posts over here and checked that my parameter 230-239 are zero and parameter 40 bit 5 is 1... further more i cant find programs like 09000 or O9001. When i tried to enter a macro program O9000 alarms shows illegal program no.
    For creating a program with 9000 ,the parameter 10 bit 4 must be 1,protects the programs from editing/deleting

  10. #10
    Join Date
    Jan 2019
    Posts
    33

    Re: Fanuc O-MD,ATC NOT FUNCTIONAL, PARAMETERS LOST

    Quote Originally Posted by zavateandu View Post
    For creating a program with 9000 ,the parameter 10 bit 4 must be 1,protects the programs from editing/deleting
    i tried to create progm after changing par. 10 bit 4 to 1 ,but got illegal program function. i also change para 240 to 6 as well but no success.
    I also tried to create prog with O9000,O9001,O9002 but nothing happens. some times i get BUFF MDI signal and program stops at T#.

  11. #11
    Join Date
    Jan 2019
    Posts
    33

    Re: Fanuc O-MD,ATC NOT FUNCTIONAL, PARAMETERS LOST

    today i found a operation manual of this machine and at the end this macro program was written.
    Attached Thumbnails Attached Thumbnails 001.jpg  

  12. #12
    Join Date
    Jan 2019
    Posts
    33

    Re: Fanuc O-MD,ATC NOT FUNCTIONAL, PARAMETERS LOST

    Quote Originally Posted by machining214 View Post
    today i found a operation manual of this machine and at the end this macro program was written.
    Hi everyone...atlast im able to write above macro O9001 for atc. the problem is when "program reaches unclamp position it stucks over there and alarm signals about improper macro". The macro in above program is about 20 tools while my machine is 16 tools atc..
    can anyone help me in writing macro for 16 tools fanuc O-MD controller?
    I will be obilged...
    Regards..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •