603,812 active members*
2,960 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > CamWorks > You need help wit a Post?
Results 1 to 18 of 18
  1. #1
    Join Date
    Jan 2015
    Posts
    9

    Post You need help wit a Post?

    If you need a new post or need changes in your post I coud help you.

    2-3 axis millng
    4-5 axis milling
    turning
    Millturn
    EDM

  2. #2
    Join Date
    Feb 2015
    Posts
    174

    Re: You need help wit a Post?

    Are you affiliated with camworks?

  3. #3
    Join Date
    Jan 2015
    Posts
    9

    Re: You need help wit a Post?

    Quote Originally Posted by stucapco View Post
    Are you affiliated with camworks?
    no

  4. #4
    Join Date
    Feb 2015
    Posts
    174

    Re: You need help wit a Post?

    Qkay, they tend to be "spammy" and difficult to work with, "fill in this form" emails till I batch delete, "here's a new offer", ect...

    NO troll intended, just curious.

  5. #5
    Join Date
    Dec 2010
    Posts
    53

    Re: You need help wit a Post?

    Hi, I´m Post developer, and I can say that turupio is one of the best professionals that I know developing postprocessors for CAMWorks / TekSof.
    If you need a post for Camworks I´m sure that he could help you.

  6. #6
    Join Date
    Jul 2005
    Posts
    1652

    Re: You need help wit a Post?

    is it possible to get a good post processor for Camworks for a Haas VF2 with 4th axis what I notice mine doing is that when it does finish contour it doesn't have "A' movement where I think it should be not to mention that it isn't even starting in the right area
    this is how I think it should be
    G00 G54 X.0021 Y0 A-.818
    G43 H01 Z1.4031/ M08

    this is how it is
    G54 G41 D35 X.087 Y0
    G43 H15 Z2.3031/ M08

    for some reason it just isn't right.. tried a few different post nothing seems to solve it so I just ran the rough contour which was right with no material left for finidh contour

    hope it makes sense
    any help is always appreciated

    Bernard
    bhoweth@jainsusa.com

  7. #7
    Join Date
    Jan 2015
    Posts
    9

    Re: You need help wit a Post?

    Hi cruizer. I just send you an email with the details.....

  8. #8
    Join Date
    Aug 2006
    Posts
    674

    Re: You need help wit a Post?

    Hi,
    I could use a bit of help. I have a converted machine that does not have limit switches. Is there a way to remove the g28 zero return reference? Currently I have to remove them manually otherwise it'll jog to infinity and beyond.

  9. #9
    Join Date
    Aug 2008
    Posts
    1187

    Re: You need help wit a Post?

    I bypassed that issue by setting up G54 0,0,0 as the new machine coordinates and use G55 for the part work offset. That allowed me to reference the mill at the zero point I wanted in G54, and used those coordinates to send the mill to for tool changes. I usually set the x and Y zero same as the part x and y zero and g54 has the z axis at full height.

  10. #10
    Join Date
    Aug 2008
    Posts
    1187

    Re: You need help wit a Post?

    Turupio,

    Your message box is full!

    Sent from my XT1080 using Tapatalk

  11. #11
    Join Date
    Jan 2015
    Posts
    9
    Quote Originally Posted by lcvette View Post
    Turupio,

    Your message box is full!

    Sent from my XT1080 using Tapatalk
    DELETED !!!!!! you can send me messages now.

  12. #12
    Join Date
    Aug 2008
    Posts
    1187

    Re: You need help wit a Post?

    Private message sent!

    Sent from my XT1080 using Tapatalk

  13. #13
    Join Date
    Jan 2015
    Posts
    9

    Re: You need help wit a Post?

    icvette your messages box is full

  14. #14
    Join Date
    Aug 2008
    Posts
    1187

    Re: You need help wit a Post?

    Lol... Going to clean out now

    Sent from my XT1080 using Tapatalk

  15. #15
    Join Date
    Aug 2008
    Posts
    1187

    Re: You need help wit a Post?

    Fixed

    Sent from my XT1080 using Tapatalk

  16. #16
    Join Date
    Jan 2015
    Posts
    9

    Re: You need help wit a Post?

    Hi, If someone need a help to develop CAMWorks post, program part or learn to use CAMWorks options you can contact me.
    Regards,

  17. #17

    Re: You need help wit a Post?

    Hi Turupio
    I know this is an old thread but if you are still around I need help locating a Fanuc Wire Edm (W1 Series) Post for Camworks.
    Can you help?

    Krispee

  18. #18
    Join Date
    Jan 2015
    Posts
    9

    Re: You need help wit a Post?

    Need CAMWORKS Post?

    If you need help with CAMWORKS post , contact me.
    turupiobi@hotmail.es

Similar Threads

  1. Replies: 4
    Last Post: 02-23-2015, 06:11 AM
  2. Special post for presentation! Laser manufacturers/dealers post their contacts here!
    By Litografa in forum Laser Engraving / Cutting Machine General Topics
    Replies: 1
    Last Post: 06-22-2010, 07:23 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •