603,813 active members*
4,707 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Oct 2007
    Posts
    4

    Unhappy Hitachi 30G FANUC 18

    Hi:

    I have a Hitachi lathe, and my problem is with the offset of the tools, when I call tool 5, 11, 2 or whatever like
    G10 T0200;
    G20 T0202;
    G30 Z3.550;
    I have the alarm F510 over travel Z +

    I don't have any manual, programing, maintenance or operation. Can somebody help me?

  2. #2
    Join Date
    Oct 2007
    Posts
    32
    Javierr, I am not too familiar with this Lathe, but with most Fanuc controls I have used a normal tool call is just T0202 for turret lathes(for a call up of station 2 offset 2), or T202 or something similiar. I dont usually have to use any G10, 20 or 30's. Not sure if you have tried this or not.


    Tcoop

  3. #3
    Join Date
    Jun 2007
    Posts
    119
    Quote Originally Posted by javierr View Post
    Hi:

    I have a Hitachi lathe, and my problem is with the offset of the tools, when I call tool 5, 11, 2 or whatever like
    G10 T0200;??
    G20 T0202; ?
    G30 Z3.550;??
    I have the alarm F510 over travel Z +

    I don't have any manual, programing, maintenance or operation. Can somebody help me?
    G10=Parameter entry mode setting,offset
    G30= 2nd,3rd,4th reference position return
    G20 =Inch input

  4. #4
    Join Date
    Oct 2007
    Posts
    4
    Thanks a lot, I'll gone try with this codes and see what happen, Thanks again

  5. #5
    Join Date
    May 2007
    Posts
    11
    Perhaps there is a mixup with the code formatting.

    N10 T0200;
    N20 T0202;
    N30 Z3.550;

    N## Indicating the line number? I'm a noob, so I could quite easily be wrong.

Similar Threads

  1. Hitachi WEDM
    By Spinner in forum Waterjet General Topics
    Replies: 8
    Last Post: 06-25-2012, 05:57 AM
  2. Fanuc 5t control on Hitachi 4ne 600
    By roota in forum Fanuc
    Replies: 1
    Last Post: 08-13-2008, 02:34 AM
  3. Hitachi 6M
    By Spinner in forum Plasma, EDM / Other similar machine Project Log
    Replies: 0
    Last Post: 07-06-2007, 07:21 PM
  4. Hitachi Seiki
    By mroy0404 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 05-08-2007, 05:28 AM
  5. Hitachi router
    By rustamd in forum DIY CNC Router Table Machines
    Replies: 3
    Last Post: 04-14-2007, 04:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •