[The_dog]

Willing to pay anyone me that can help us fix it
We have a cnc mill with osai series 10 controller ver5.1 .
There is one Hdd that have 4 partitions.
Our problem is that on normal boot partition E and F are write protected.C D and A are not write protected. Also L: which is network driver (netbue is write protected too). I have check and all attires on files seems fine.
On emergency boot (pressing F1) all 4 partition are working without write protection
We have all passwords for all level for security. tried all of the different level and nothing is working .
Our TCP is not working correctly because of this
Also we this is slowing down since we can not upload files to the cnc or edit gcode without turning the cnc off and on again
Anyone can help us with this issue? Willing to pay for info.

[bravernoe]

t sounds like your issue with write protection on certain partitions and network drives during normal boot could be related to permissions or security settings configured within the OSAI Series 10 controller's operating system. Emergency boot bypassing the issue suggests a potential software configuration issue rather than hardware failure.

[The_dog]

I have all securoy level passwords up to 0 level. I have tried them and the write protection on partition e: and F is still there.

[The_dog]

can anyone help? Any professionals that can give me any remote support? Tried osai and osai_uk but they can not help me unless is send them the complete controller.
Really need this solved