Does anyone know how to modify and open the PC side?
Thread: okumaPLC modified P200
Results 1 to 3 of 3
-
09-30-2023, 09:23 AM #1
Member
- Join Date
- Sep 2023
- Posts
- 25
okumaPLC modified P200
-
09-30-2023, 01:39 PM #2
Member
- Join Date
- Jun 2015
- Posts
- 4190
Re: okumaPLC modified P200
hy, what do you wish to achieve ?
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
-
09-30-2023, 04:08 PM #3
Member
- Join Date
- Sep 2023
- Posts
- 25
Re: okumaPLC modified P200
Modified PLC Added functions
-
09-30-2023, 04:28 PM #4
Member
- Join Date
- Jun 2015
- Posts
- 4190
Re: okumaPLC modified P200
switch plc change mode, then enable the mask, as long as you know what to disable from the i/o monitor
thus i can help you only with attached, if you know what to do there / kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
-
10-06-2023, 04:22 PM #5
Member
- Join Date
- Sep 2023
- Posts
- 25
This is a forced I/O function, right?
-
10-06-2023, 04:23 PM #6
Member
- Join Date
- Sep 2023
- Posts
- 25
I am trying to modify PLC on D300win software
Originally Posted by deadlykitten
switch plc change mode, then enable the mask, as long as you know what to disable from the i/o monitor
thus i can help you only with attached, if you know what to do there / kindly
-
10-06-2023, 07:05 PM #7
Member
- Join Date
- Jun 2015
- Posts
- 4190
Re: okumaPLC modified P200
yes, is force io
so sorry, can't help you with d300 ...Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
Reply With Quote
