[taylorn]

Hey all, my taig cnc mill is running very good now, but the problem is that mach 3 doesn't comprehend the feed rate I set in MADCam. It seems that no matter if I set the feed rate to 20ipm or 120ipm, it doesn't seem to change the speed of the machine very much, if at all. And if I try to speed it up with the FRO, it will speed it up, but it will then have glitches and ruin my part. The only thing I can think of is a glitch in the program, because it has happend with two different computers.

[ger21]

Need to see you g-code.

[taylorn]

i'll try and get some g codes up here, but it is happening with any g code i make, even if i manually edit the speed in the code, so that leads me to beleive that its mach not madcam. but i'll try and get one up.

[Monte]

i'll try and get some g codes up here, but it is happening with any g code i make, even if i manually edit the speed in the code, so that leads me to beleive that its mach not madcam. but i'll try and get one up.

Post your .xml file. Might be mach3mill.xml I have a Taig also and Mach works great.

Monte