This will make you take a different perspective of the Praying Mantis
COOOOOOL!!!!!!!!!!!!!!
[ame="http://www.youtube.com/watch?v=pNcIUIULafw"]YouTube - Praying Mantis versus Mouse[/ame]
Thread: Mantis vs Mouse!!!!!!
Results 1 to 3 of 3
-
07-03-2008, 04:33 PM #1
Moderator
- Join Date
- Jan 2006
- Posts
- 4396
Mantis vs Mouse!!!!!!
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
-
07-03-2008, 04:57 PM #2
Registered
- Join Date
- Apr 2003
- Posts
- 1876
Damn cock-roach ate my mouse!
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
07-03-2008, 05:06 PM #3
Moderator
- Join Date
- Jan 2006
- Posts
- 4396
I bet it was tasty too
Makes one glad your not a mouse
BTW: My better half found three in her plant when watering it so I took a few Pics of this guy. Then set them free outside in the bushes so they can eat the bugs.
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
Reply With QuoteSimilar Threads
-
3D Mouse
By kendo in forum BobCad-CamReplies: 1Last Post: 05-27-2008, 09:50 AM -
reading mouse movement
By multiplex in forum Mach Wizards, Macros, & AddonsReplies: 1Last Post: 04-10-2008, 02:06 PM -
Mouse problems w/MC9
By Halfnutz in forum MastercamReplies: 3Last Post: 10-14-2006, 06:27 AM -
2D Digitizing using mouse
By DennisCNC in forum Digitizing and Laser DigitizingReplies: 0Last Post: 05-08-2006, 04:08 AM -
Mouse encoders
By Rance in forum CNC Machine Related ElectronicsReplies: 26Last Post: 02-07-2005, 08:46 PM
Posting Permissions
