[D5zUga]

So here we go with yet another watch model. Going into details wasn't my cup before but recently I realized it doesn't worth the effort otherwise. I've zoomed on the unique knob and dial, accepting the advice of modelling the hands rather than drawing. The brace is my own design. I had to make the dials from scratch 'cause it wasn't to be found on the web and this was a. most intriguing, and b. to last for ever in my disk.
1. The knob >> http://www.2and2.net/Uploads/Images/watch04+knob.jpg
2. The dial >> http://www.2and2.net/Uploads/Images/watch04+dial.jpg
3. The model >> http://www.2and2.net/Uploads/Images/watch04+body.jpg

[Dan B]

Are you using the default renderer in Rhino?

Dan

[D5zUga]

No I'm using C4d but folks are telling me I sould get Max
Tnx for comment

[Dan B]

I was just wondering because you don't have the reflectiveness (if that is a real word?) that one would expect for jewellry rendering. Have you considered Flamingo? It's cheap ($199 US at www.ob.com) and does a pretty good job. It's not the fastest from what I hear, but it is one of the cheapest and works seamlessly in Rhino.

Dan

[D5zUga]

Tnx Dan but I have little experience with all non Rhino apps, so I should practice.
My main point always is first and foremost to present modelling
Tnx again for comment