[double*d]

I just joined you yesterday and I'd like to say hell-o to everyone. I'm a nc programmer with a problem. This old machine is new to us. I'm using Surfcam velocity 3 to program. This machine doesn't have an automatic tool changer. I'm using the postprocessor fadal format 1 rigid tapping. I need to see what a small program to spot drill, drill, and machine a small pocket should look like. Any help would be greatly appreciated.


I'm new at this so I know I'll give you some laughs.
thanks

[dpark1]

N2 ( CREATED ON 12-12-08 AT 3:35 PM )
N3G20
N4G0G17G40G80G90
N5 ( 1/4 CENTERDRILL TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA - .25 )
N6T1M6
N7G0G90S1400M3E1X-2.Y2.
N8H1Z1.M8
N9G81G98X-2.Y2.Z-.125R0.1F3.
N10Y-2.
N11X2.
N12Y2.
N13G80
N14M5M9
N15G90H0Z0.
N16M1
N17 ( 1/2 DRILL TOOL - 2 DIA. OFF. - 2 LEN. - 2 DIA - .5 )
N18T2M6
N19G0G90S600M3E1X-2.Y2.
N20H2Z1.M8
N21G83G98X-2.Y2.Z-1.R0.1Q.06F2.
N22Y-2.
N23X2.
N24Y2.
N25G80
N26M5M9
N27G90H0Z0.
N28M1
N29 ( 3/4 FLAT ENDMILL TOOL - 3 DIA. OFF. - 3 LEN. - 3 DIA - .75 )
N30T3M6
N31G0G90S800M3E1X-.0525Y.0525
N32H3Z1.M8
N33Z.1
N34G1Z-.5F10.
N35Y-.0525
N36X.0525
N37Y.0525
N38X-.0525
N39X-.24Y.24
N40Y-.24
N41X.24
N42Y.24
N43X-.24
N44X-.615Y.615
N45Y-.615
N46X.615
N47Y.615
N48X-.615
N49Z-.4
N50G0Z.1
N51X-.625Y.625
N52G1Z-.5
N53Y-.625
N54X.625
N55Y.625
N56X-.625
N57Z-.4
N58G0Z1.
N59M5M9
N60G90H0Z0.
N61E0X0Y0
N62M30

[double*d]

Thank you for your time to help me. I'll try this.