[Al_The_Man]

This control looks promising and it is supposed to be a good price for the retrofit market, anyone using a machine with this control?
http://www.ad.siemens.de/mc/mediadb/...0BK02-0BA0.pdf
Al

[Moondog]

Al...

Looks good..any idea of the price.... I assume it is a complete controller?...

Is it also a Post Processor as well or will it still require a PP like Mac2?...

[Al_The_Man]

I had heard it was around US$5,000.00 for control hardware and software, I am looking into it, I believe you would still need Cam program to convert to G code.
Al

[Moondog]

I had heard it was around US$5,000.00 for control hardware and software, I am looking into it, I believe you would still need Cam program to convert to G code.
Al

Al.. $5,000... do you think it is good value, what else would be comparable?..

[Al_The_Man]

This would be a competitor to the higher end PC based and the big name players like Fagor and others etc.
e.g. Camsoft Professional at just under $5,000.00 for s/w + motion card $1,500.00 to $2,000.00 dpending on # axis, plus i/o card plus i/o interface.
Acroloop MotionMax $5,000.00 plus motion card $2,000.00 c/w built in PLC and i/o.
The siemens also has a stepper motor version.
These systems are aimed at the high speed machining market or large machine retro-fit market and not intended to compete with the PC software based style CNC that uses the printer port syle of control.
Al

[jkeyser14]

I work for Siemens, a different division though. I should be able to get a discount on one of those puppies. Gotta wait until after Thanksgiving to find out though.

[HillBilly]

I have worked on some Hurco VMC's that use Siemens CNC's. The operators say it is a easy to use control.

Darek