Looking for candidates with 2+ years of Mastercam and experience prototyping and using Mastercam X, X2 (Ideal), or X3 for a shop in beautiful North Austin. Prefer candidates with Haas, 5 Axis, or med device experience.
1st shift M-Th 6-4:30 with occassional Fridays for additional OT; $22-28/hr depending on experience.
Qualified candidates should email resumes to [email protected].
No relocation offered.
Results 1 to 3 of 3
-
03-11-2009, 12:24 AM #1
Registered
- Join Date
- Jun 2008
- Posts
- 2
Prototype Programmer with Mastercam X Experience
-
03-11-2009, 07:02 PM #2
Member
- Join Date
- Jun 2008
- Posts
- 13
I am a mold maker with 30+ yrs. experience. Design and programming experience. Have worked with Mastercam X...X2....currently using X3.
Also have experience with Unigraphics, Autocad, and Bobcad.
What type of work would the programming be for?
Jim
-
03-12-2009, 10:58 PM #3
Registered
- Join Date
- Jun 2008
- Posts
- 2
Reply
Medical Device; both implants and tooling used in surgeries.
If you would like to discuss, please give me a call at 512-257-6918.
Josh
Reply With QuoteSimilar Threads
-
5 Axis programmer - Mastercam
By Rotor_nut01 in forum Australia, New Zealand Club HouseReplies: 0Last Post: 01-27-2009, 12:42 PM -
Contract Mastercam Programmer Wanted
By smecher in forum Employment OpportunityReplies: 1Last Post: 08-01-2008, 02:20 PM -
Looking for a programmer for MAstercam in Phoenix (Gilbert) AZ
By rackthis in forum Employment OpportunityReplies: 3Last Post: 12-05-2007, 04:04 PM -
looking for a mastercam programmer
By PBMW in forum MastercamReplies: 3Last Post: 11-23-2007, 04:05 PM -
MasterCam/Solidworks/NCL/3-4-5 axis programmer
By tala in forum Employment OpportunityReplies: 1Last Post: 10-30-2007, 05:06 AM
Posting Permissions
