[SatanKlawz]

I need a quote on 2 parts made of steel or high strength aluminum. These will be the sides of my home built router and I need 2 of these. Drawing is in MM and would like quotes for material thickness in both 1/2" and 3/4" materials. Height is 152mm and the length is 1300mm. You can download the .DXF file and open it in pretty much any cad program and check the dimensions. There are 2 sizes of holes and neither need to be tapped. The holes that are grouped in 4's are all 5mm dia. and the holes that run the length of the part are 5.1mm. dia.

[cncjunky]

I need a quote on 2 parts made of steel or high strength aluminum. These will be the sides of my home built router and I need 2 of these. Drawing is in MM and would like quotes for material thickness in both 1/2" and 3/4" materials. Total length should be around 1300mm if I remember correctly.

Could you post a picture of the drawing? And could you post it in IGES ?

[SatanKlawz]

There ya go... I just took a screen shot.