603,849 active members*
3,142 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2008
    Posts
    27

    Mach 3, Coreldrawx4

    Could anyone tell me if Corel Draw x4 can be used with the Lazy cam and Mach3 soft ware?

  2. #2
    Join Date
    Dec 2004
    Posts
    1865
    Only if it exports in the dxf format.
    Warning: DIY CNC may cause extreme hair loss due to you pulling your hair out.

  3. #3
    Join Date
    Mar 2003
    Posts
    322

    DXFTool Standard Edition

    Hi,

    We have a new version of the DXFTool for CorelDRAW, the Standard Edition. It produces LINE and ARC entities in a compatible DXF format. This release breaks new ground on the ARC conversion method used.

    The download is free, see http://www.coreldrawtools.com

    The website is still being worked on, so please be gentle, but the installers are all there. I will make a formal announcement later today.

    -James Leonard
    James Leonard - www.DragonCNC.com - www.LeonardCNCSoftware.com - www.CorelDRAWCadCam.com - www.LeonardMusicalInstruments.com

Similar Threads

  1. Mach 2 Works, Mach 3 Doesn't
    By mrcosmos in forum Mach Software (ArtSoft software)
    Replies: 9
    Last Post: 07-27-2008, 09:12 PM
  2. Confused: Mach Turn, Mach Mill, Mach 2/3 ?
    By CanSir in forum Mach Software (ArtSoft software)
    Replies: 5
    Last Post: 02-16-2007, 11:41 AM
  3. Mach 3 no spindle - but OK in Mach 2
    By zcases in forum Mach Software (ArtSoft software)
    Replies: 9
    Last Post: 07-31-2006, 01:38 PM
  4. Moving to mach 3 need exact mach 2 screen
    By carlnpa in forum Mach Software (ArtSoft software)
    Replies: 2
    Last Post: 12-11-2005, 10:00 PM
  5. will mach 2 or mach 3 work for 4 axis cnc?
    By Runner4404spd in forum Mach Mill
    Replies: 3
    Last Post: 10-05-2005, 05:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •