[dar303]

(If this is in the wrong section just say so and I'll delete/move it)

Hi,

I have a 60.000RPM GMN spindle with pneumatic ATC from a PCB drill that I realized I will never use so I wonder if anyone here are interested buying or trading something for it?

The spindle needs water for cooling, oil/air lubrication for the bearing and air pressure to operate the ATC/tool clamping.

These are the specification for it:
GMN TSS 62 - 60000
0,7kW S 6-60%
60000 1/min
165V 3,8A 1000Hz

I have a Danfoss 3 phase 230V 1000Hz inverter for it too.

I do not have the manual but I found one for a newer model that is pretty similar:
Manual

It weighs about 7kgs and is located in Sweden.

I may be interested in trades for linear motors, ballscrews/linear slides, Berger-Lahr 320Volt steppers, Granite Devices servo drivers, Sanyo-Denki Servo motors among other stuff.

[dar303]

Here are a couple of pictures:

[Drools]

You would probably have better results posting this in the classifieds.