When upgrading to a newer version of Mach3 what files/folders need to be copied to the upgraded version to keep existing settings/motor tuning/plugins/etc. Thanks.
George
Thread: Mach upgrade
Results 1 to 2 of 2
-
10-21-2009, 11:53 PM #1
Registered
- Join Date
- Dec 2007
- Posts
- 3
Mach upgrade
-
10-22-2009, 12:08 AM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35494
Mach3mill.xml, provided that mach3mill is the profile you use. If you have any custom macros, you'll need to save them as well.
You shouldn't have to do anything when upgrading, though. But backing up the xml is always a good idea, whether your upgrading or not.Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Join DOS to Win/Mach Upgrade Discussion?
By gerryv in forum Canadian Club HouseReplies: 2Last Post: 12-08-2007, 01:49 AM -
Confused: Mach Turn, Mach Mill, Mach 2/3 ?
By CanSir in forum Mach Software (ArtSoft software)Replies: 5Last Post: 02-16-2007, 11:41 AM -
Mach 3 upgrade....
By CRFultz in forum Mach Software (ArtSoft software)Replies: 24Last Post: 04-02-2006, 08:41 PM -
Moving to mach 3 need exact mach 2 screen
By carlnpa in forum Mach Software (ArtSoft software)Replies: 2Last Post: 12-11-2005, 10:00 PM -
will mach 2 or mach 3 work for 4 axis cnc?
By Runner4404spd in forum Mach MillReplies: 3Last Post: 10-05-2005, 05:44 PM
Posting Permissions
