587,751 active members*
2,995 visitors online*
Register for free
Login

Thread: Help. VMC TNC370 start up

Results 1 to 2 of 2
  1. 02-24-2018, 07:31 PM #1
    matty123
    matty123 is offline Registered
    Join Date
    Oct 2017
    Posts
    7

    Help. VMC TNC370 start up

    Hello, I've taken ownership of a Bridgeport VMC 600 with Heidenhain TNC 370.
    I'm having an issue with getting it to complete the transverse action during start up.
    After a logo, the screen comes up with "power interrupted" and pressing CE moves the screen onto the transverse axis setup, following the instruction manual I should press the button to turn on the control followed by the cycle start button.
    However, when I press these buttons nothing happens, no clicks, no beeps, no movement, nothing.
    The first time I used the machine today it went fine and started just as expected. Only after starting it for the second time I can't get it to work.
    Any ideas?
    Reply With Quote Reply With Quote
  2. 02-27-2018, 12:47 PM #2
    matty123
    matty123 is offline Registered
    Join Date
    Oct 2017
    Posts
    7

    Re: Help. VMC TNC370 start up

    So after a whole bunch of turning it off, leaving it and turning it on again, it started.
    No idea what happened, but it hasn't happened since.

    moving onto problem number 2... drip feeding the VMC600
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. post processor for heidenhain tnc370
    By themistoklis in forum Post Processor Files
    Replies: 0
    Last Post: 07-17-2016, 07:08 PM
  2. Hi everyone need help.. for bridgeport TC2 with TNC370 Control
    By bcslc in forum DNC Problems and Solutions
    Replies: 1
    Last Post: 01-15-2015, 08:36 PM
  3. RS 232 to TNC370
    By Patrik in forum DNC Problems and Solutions
    Replies: 1
    Last Post: 12-14-2014, 02:40 PM
  4. PPR settings in TNC370
    By wahidbashir in forum Bridgeport / Hardinge Mills
    Replies: 1
    Last Post: 12-21-2010, 08:03 PM
  5. TNC370 Machine to Computer communication
    By wahidbashir in forum Bridgeport / Hardinge Mills
    Replies: 1
    Last Post: 02-14-2010, 09:12 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules