I am inexperienced in these subjects of the Stepper Motors and CNC.
Some questions about the Stepper Motors and IC's that I have.
Which the electric tension for the correct functioning?
Which the torque that they possess?
Which the appropriate dimensions for a table XYZ+A that it uses my stepper motors.(I intend to use for aluminum, mdf, plexiglass, nylon and foam).
It's available for free or for few € some decent and efficient electronic circuit to control 4 axis bipolar stepper motor where if can use some of my IC's? with microstepping?
What to make to also have the manual control and in the PC?
If the circuit will not have microstep the PC can generates it?What I have:PS:
Stepper Motors
Unipolar
VEXTA Oriental MOTOR
PH264-01-C27 (4V 1.1A/Phase 1.8Deg/Step) 6 wires
Bipolar
ASTROSYN STEPPER MINEBEA
Type 23LM-C355-36 double axis (i don't know specifications) 4 wires
Type 23LM-C355-15 (2.5A/Phase 1.8Deg/Step) 4 wires
Type 23LM-C058-05H (1.4A/Phase 1.8Deg/Step) 4 wires
Type 24BB-H139-01(i don't know specifications) 4 wires
IC's.
8x L298N, 8x L293D, 2x L6219 e 2x L6506D
and
enormous force of will
I never used PIC nor programmed none, nor have ways to program them.
Please heeeeeeeeeeelp meeeeeeeeee.
Thank's,
Coelho