[SignWave]

Hello Everyone,

Is there anybody out there that might be able to photograph the ends of a 130watt 80mm dia. laser tube from Reci or SPT?
I purchased a tube and I am attempting to find out if I was sold a faulty tube, or a used/damaged tube or if it is infact new. I have nothing to compare to and there are very few detailed images online.

I am after close up, focused , well taken images of both the anode and the cathode as well as the emitters at each end that are inside the reaction tube.

I would be grateful if someone could help. In the mean time I will do what I can to help out whoever might need help themselves...

Thanks in advance.

Cheers! SW

[Leislei]

Hello SW

Have a nice day!

This is Lei from DWD Mechatronics Co.,Ltd,used to be service engineer of cnc router before being a salesman,i attached one picture ,this is reci 130w which i bought for my clients, please check if it can help you . If you met other machine problems about cnc router or laser, you can contact with me ,i will try my best to give you solution. My mail is :[email protected], and whatsapp: +86-15621880878. Thanks

[SignWave]

Thank you for the image. unfortunately I require images of both ends of the tube. I would like to see what the outer metal connector/jacket looks like and also the emitters inside the reaction chamber.

Thank you again..!

I will attempt to make contact with you shortly.

[SPT-Laser]

Hello,

I'm Emily from SPT laser, manufacturing co2 laser tube.

Below is the tube ends of T130.


Emily

[SignWave]

Hello,

I'm Emily from SPT laser, manufacturing co2 laser tube.

Below is the tube ends of T130.


Emily

Thank you Emily.
Can you show side view image of anode and cathode?
If a tube is brand new and not used is there discoloration on cathode? yello color from heated metal? Thank you for sharing

[SPT-Laser]

Hello,

Send me the picture of your tube ends, I will see.

[SignWave]

I have these photos. I can take better if needed....
Attachment 356148

[SPT-Laser]

It seems ok from the picture you sent me. It's not SPT tubes