Hi, just recently purchased a 1998 Milltronics MB20 with Centurion 6 controller. Just wondered if you guys have any advice on safest way to have shipped and unloaded. Machine is being loaded on truck by riggers and shipped by freight to me. Riggers said machine would be put on a pallet, head blocked up and that it would be tarped. Once I get it I was planning on unloading pallet with forklift and using steel round bar stock to put through the holes on the base of the machine front and rear to use for lifting the machine off the pallet and setting in place. Does this sound right? Anything I’m missing or that you guys would recommend doing differently. I attached some pics I found online. It’s where I got the bar stock idea from and blocking head. Thanks!
msmf