Can someone here lead me through an example part utilizing UG CAM? I can provide the part if needed.
Can someone here lead me through an example part utilizing UG CAM? I can provide the part if needed.
I just went for 1 week training at UGS in Cypress, CA. (Mill Process Introduction)
UG is not an easy program to self teach, unlike many PC based CAM systems.
Have you been able to go thru the cass tutorial?
Scott_bob
I've been through UG training for modelling and drafting a couple of years ago, but haven't been to the CAM class.
I'm looking for a minimum of understanding in the CAM part of UG. Somewhere to start. I need to make a couple CNC programs for some simple models for prototypes. I've got a CNC now and need to use it. Thought if I could make it through an example, that I might be able to connect enough dots to do a couple of parts. Maybe pie in the sky thinking, but I would like to try.
kaye7877,
Do you have the tutorial files?
They are a good start...
Scott_bob
Hi everyone!
I have a real problem with outputting g-code for probing operations. Post makes an error like "something wrong with mom_before_motion". Could you guys help with advice. Especially interested in what is needed to be done in post processor.
Thanks in advance.