[crob09]

Hi,
I posted earlier look for a solution to a chuck, it isn't quite solved yet but thats alright. I am now on a different problem/ question.

I have this contactor what is a cnc contactor and I am wondering how I use it to control the spindal motor. I am using steppers to move the tail stock and the tooling. The spindal is a DC motor out of a blower and it would be very cool if I could use this contactor some how to control the motor.
Is it something I can use with pokeys or phidgets?

Thanks for any help.

Rob from what is a cnc

My contactor is found at what is a cnc contactor and there is a link on the page to one for sale on the page.

[Al_The_Man]

The contactor you show is primarily used for 3ph AC control, DC requires some special arc shields and contacts, normally you control the spindle motor through a controller of some kind? or are you operating this motor full on?
Do you need reversing feature?
Al.

[vtx1029]

I use a contactor (same brand) in my powder coating oven 220v 1phase and its really loud! I think you would burn it out trying to control a motor or drive you nuts before it burned out. At minimum get a SSR with a heat sink.

Maybe use that in conjunction with the Super PID and have it trigger the SSR...

keep the contactor to be your main power switch to the machine

[Al_The_Man]

Maybe use that in conjunction with the Super PID and have it trigger the SSR...

The OP mentions a DC spindle, the PID is for a universal motor.
It all depends on the nature of the spindle control?
Al.

[vtx1029]

The OP mentions a DC spindle, the PID is for a universal motor.
It all depends on the nature of the spindle control?
Al.

oops I miss that.

[crob09]

Hi,
Thanks for all your help.
I suppose I am better off just leaving things the way they are for now, I don't need to control the spindal and if I do I will just change the motor to a stepper.
I just figured I could use the contact block for something, it has been sitting around for a while now.
Al what do you mean by a "universal motor"?