Hello
Im looking for a mastercam 9 postprocessor for a matsuura mc500v mini master 1989 with yasnac 3000g and system M5G, I try to make my own post but i have some problems making arcs, Can somabody help me.
Luis
Hello
Im looking for a mastercam 9 postprocessor for a matsuura mc500v mini master 1989 with yasnac 3000g and system M5G, I try to make my own post but i have some problems making arcs, Can somabody help me.
Luis
what is it doing?
www.cad2cam.net
www.cad2cam.net
Programmer/ Certified Cam Instructor
is very strange because when its making an arc the machine stops working or suddenly it looks like it loose the reference and goes crazy, i dont know how to correct this.
for example when the machine stops the control send me an input error! that said that there is a program mistake.
Any suggestion?
Luis
G2 G3 switched around?
www.cad2cam.net
Programmer/ Certified Cam Instructor
How can i check this?
Luis
change it in your nc file and run it in the machine to test. don't cut a part test the movement.
www.cad2cam.net
Programmer/ Certified Cam Instructor
Querria comunicarme contigo,estoy aqui en el DF mi telefono es el 43 98 49 19
Es con respecto a tu maquina mi correo es [email protected]
Gracias
Benjamin
hi,
I have to SolidCAM.
[email protected]