in the video what input pins are you using is it the same one as the first z plate is using. I had this running at one time on my machine but had to take the machine apart and cant remember how I had it wired. The script is still in the computer. just not sure what pin to make this.
Here is my pins on my machine
a home slave to y pin 12
y home pin 13
x home pin 10
z home pin 11 touch plate like your first one
what pin and input do I need to use to start this program ..
here is a link to my question
http://www.cnczone.com/forums/uncate...ght-plate.html