Re: G0704 Power draw bar from midwest machine works
That is a terrible design. The draw bar should be squeezing the stack of washers without applying any pressure to the spindle. It's just jamming the drawbar down against the bearings, probably messing up your pre-load. You should have some sort of lift plate and a top hat that threads onto the top of the spindle. The stack then goes on top of that. The power draw bar then lefts up and pushes down to squeeze the washers. Look at Hoss's design.
Inner Vision Development Corp. - http://www.ivdc.com
Website Design & Development. Shopping Carts, SEO and more!