[Melody-gweike]

Good weekend everyone!

This afternoon I went to our factory to do a test of making silicone bracelets. Because these days some customers asked for this, and i also wanted to make some for the concert which i will watch later.

1) my technician and i chose a new rotary for this

[Melody-gweike]

2) Measuring the dia.

[Melody-gweike]

3. Calculating

[Melody-gweike]

4. Setting the Parameters

[Melody-gweike]

5） a short engraving video.

Not very good, because we don't connect the air compressor when we test in the factory. Also because of the machine size is a little large (LC1290) and the power was also a little large~~

[ame=http://www.youtube.com/watch?v=UJMCik3cAc8]silicone laser engraving - YouTube[/ame]

:wave: Runar, hope you can watch this!

[Melody-gweike]

6) We changed to a desktop machine and found an easy way for this. We fixed the bracelets to a small box. And now it is very easy to engrave~ Although it makes a little smoke & fire because without an air compressor, but the result seems much better now~


[ame=http://www.youtube.com/watch?v=3uHzxSiuGto]silicone laser engraving 2 - YouTube[/ame]

[insound]

very nice