Hello there....I am new here and have been collecting some older CNC machines to play with. I have recently received a Nice Interact 1 mk2 with the Heidenhain 2500 controller. The machine was suppose to be fully functional and in excellent condition.....but I am having some issues.
When I power up the machine and go through the normal pre-run (I have the same machine with a 155 controller) and then try to get the spindle going in manual mode, I press the Tool Call key and get a (key is non functional) response from the machine. I have checked everything I can....including the Oil level.... Also, the light is on on the MT1 board
Can anyone help me with this? Any help would be greatly appreciated.....Thanks