Re: Where to buy quality metric end mills?
Thanks for the input guys.
I'm seriously considering buying from the US, including a bunch of imperial sizes. Whilst it means it a little more calculations if working MDI / manually, they are much more available and cheaper. It also has the advantage of not rubbing on my standard corner radii. E.g. 3/8" = 9.525mm, which would avoid rubbing that I would normally get with a 10mm end mill in a 5mm radius corner.
7xCNC.com - CNC info for the minilathe (7x10, 7x12, 7x14, 7x16)