Hello Everyone,
I have a 2008 Yama Seiki that I bought used and there are some weird things going on with it.
When ever you start a program or MDI in a go to command, the machine must start from the home position or be home first. I understand the machine has to be homed when you first turn it on but this machine needs to be homed everything you jog the axis it around. If you leave in in auto mode and continue running the program over and over its fine but as soon as you switch it to RAPID or HAND JOB, it needs to be homed or it will say axis over travel or go somewhere else. It is a Fanuc 0i controller.
Any help would be great.
Thank you