[specialty8]

Hi all. I am having a problem with my Daewoo 8S.It has the Fanuc otc control. I am getting a 409 machine alarm and a #12 alarm on the spindle amplifier. I know little about how to fix something like this and was wondering who is the service man in my area or someone who would be interested in fixing it. I am located in Edinburg Va. zip 22824. I am new here so any help or tips would be appreciated.

Thanks,
Ron

[ies fixs]

Disconnect the motor and see if you get the same alarms. Let me know what you find.

[specialty8]

Disconnect the motor and see if you get the same alarms. Let me know what you find.

Do I have to unwire the motor or is there a breaker or fuse I can disconnect? I can do electrical work but know nothing about electronics as you can see.

Thanks

[ies fixs]

Do I have to unwire the motor or is there a breaker or fuse I can disconnect? I can do electrical work but know nothing about electronics as you can see.

Thanks

There should be cables connecting your motor to your machine.

Power the machine down, disconnect the cables from the motor, and power the machine back up. Do the errors change? Is anything different?

[specialty8]

I will give it a try and see what happens. Thanks

[ies fixs]

I will give it a try and see what happens. Thanks

Any time. Feel free to email me your results. [email protected]