Re: CLEANING UP DAMAGED THREADS
![Quote](images/misc/quote_icon.png)
Originally Posted by
300sniper
Should be simple by adjusting your z start point.
except that you would also have to specific that angular position of the spindle, or you will pick up the thread in the wrong spot. Tormach doesn't accurately measure the angular position of their spindle, so picking up a thread like that wouldn't work.
You could always mount a die on the cross-slide, but that seems like a good way to break something.
Tim
Tormach 1100-3, Grizzly G0709 lathe, Clausing 8520 mill, SolidWorks, HSMWorks.