Hello, I bought this lathe from a second hand machinery company that bought all the machines that were used at Mathers Foundry in Manchester before it closed a few years back. Towed it 400 miles back to Peterhead with my old Discovery reaching highs of nearly 40mph.
The batteries were completely flat but there was a punch tape and paper copies of the original parameters from 1990. I have backed up, then punched these all into the control.
There were a few parameters missing so i used ones that were on another thread "Colchester 2000L with Fanuc OT- Model A Control" the majority of the parameters were the same.
I have worked through a few alarms that came up and I have got down to alarms 310 and 320.
I have been a Mazak machinist for around 13 years now but new to FANUC so may be something straight forward but i am totally stumped at this and have been for days.
Not sure if this is the information needed to get the values, but the only serial number on the machine i can find is the following from label at the top of the electrical cabinet.
FANUC Series 0-TC
TYPE A02B-0098-B501
DATE 1989-05
No. 9055614
Any help is appreciated, Thanks, Iain