I am having issues with my setup. The controller worked at one point, I came back to the project, updated Mach3 and now I get no movement and no LED status light at the pins to the motor drivers.
Things I know:
-Computer is communicating with the ESS from what I can tell (lights all look correct and I am receiving no BootPrx packets)
-C11 board has green light on enable
-2 5V connections to the C11
-1V on pins 2-7 and 5V on the COM pins
-Mach3 has the ports and pins entered and enabled
-No voltage change on pins when I jog in Mach3
-The Mach3 DRO increments when I jog
-Stepper drivers are have green status
-I can rotate the ball screw by hand
What else can I look for? I'm at a lose and have spent too many hours on this already. Arturo is helping but it is a scattershot approach and responses are not conducive to figuring this out anytime soon.
Attachment 433472Attachment 433474Attachment 433476Attachment 433478