Re: only half spindle speed
Have you checked the gear ratio parameter setting
Originally Posted by
bulburn
Hi guys,
i have an okuma LB15 with osp5000 control.
If i set a spindle speed it will run only at half rpm. The maximum it reaches is 1400 rpm. I checked the 2 gears and they work fine, the tachometer is already new and shows the right rpm. The machine has no erros or fault codes, everything seems to work fine except the spindle speed. There is no g50 speedlimit command, i checked that too.
I don´t know what to do next. I called some technicians, but nobody has a clue.
Maybe you guys have an idea for me what the problem could be.
Thank you
greetings
giovanni
http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html