[lovebugjunkie]

I received my Romaxx HS1 CNC router today. I have not found much info on the forum about the Romaxx. Thought I would post my experience so far with Romaxx as someone that is completely new to the world of CNC. I have no ties to Romaxx other than being a customer. Please try and over look my spelling and grammar.

I will be running Mach3 to control the machine and VcarvePro and PhotoVcarve.

First thing was the box. Romaxx knows how to ship equipment they enclosed the machine in a plywood crate. The crate was packed in a cardboard box. It came with no dints, dings and nothing loose inside. (Thank You Fedx)

After removing the bolts that secured the machine to the plywood bottom I installed the leg supports in their place. I ordered the feedback option, which required a second port in the PC. Romaxx included the PCI card to be installed in the PC with two cables that connects the PC to the machine.

I do not have the machine “moving” yet, but my first impression of the workmanship is very positive. Very solid machine for it size and well built. (Very well built)



Will update as I make progress. (And hopefully learn what I am doing )

[cabnet636]

looks well built.
i noticed yesterday, that rockler pro catalog has a 14x31 machine available

it's not on thier website but the stock number was 35150,

i believe we are going to see an explosion of sales in this size router after

carvewrights exposure of cnc to the woodworker and that the machine probably will not male it in the long run (lot'ssssss of problems with long term use of the machine) and yes i have one!! i also have a 4x8 camaster

i am still hoping tha they will notice and realize the software they have created is probably where thier money is.

jim

[cabnet636]

at the website that one well figured out router for the money much better built than the one at rockler jim

[cabnet636]

i have a 4x8 camaster and am about to embark on having another one built,

however my wife and her friends are members of the local woodturners club and they want my old carve wright compucarve it has way to many problems and while i have it in working condition i want to keep it that way, so i am thinking of the machine you got for out here at the farm and my wife

http://www.romaxxcnc.com/.

have you run machine show me some pic's whats your impression
here site for those interested


jim

[lovebugjunkie]

Jim
I first came across the CNCzone a few years ago and was amazed at what people had built/bought and the work they did with them. I was put off on the whole CNC idea as I thought I would never be able to pick it up. When Sears first started selling the compucarve I got interested again but for reasons you referred to I put off getting one. I was going to have only one crack at a cnc router and if it did not work out the banker (wife) would be a hard sell for another one. I purchased Vcarve pro last year to make sure I would be able to pick up that end of CNC and would be able to make something that would be more than shop vac full of sawdust. Two months of playing with it and I was committed to getting a CNC router.

The HS1 is ready to run out of the box, install your spindle hook up the cable(s) to your pc and your off. If I had known anything about Mach3 it would have taken me less then 15 minutes to have it moving.

I am very happy with the HS1. I was playing with it today trying to get me head round Mach3. It has a “massive” feel (not sure that is the correct word) for its size. Nothing on this machine makes you think it was an afterthought or add on to correct a design error or gives you the impression it was put together by someone that has a cut off saw and a big hammer and wants to make quick buck.

I was running it at 60 ipm today, (Ron provides conf files for 60,100,300 and 1200ipm. Nice touch for people like me that know zip about Mach3 and changing the configuration) I have it setting on a large table and it did not move. After I get more confidence in setting up with the correct work offsets will try 100 or 300.

When I created the part in Vcarve and loaded it into Mach3 I was also getting a bunch of circles with the part I loaded, had no idea why. Quick email to Ron and an even quicker reply and problem solved. Nice to have this type of customer service. (on a Saturday even)

And the old man learned a few things today.

1. The big red stop button is there for a reason. I drove the bit to the table. No real damage, the router was not powered on and I had it “loose” fit in the mount, (know idea those steppers had so much power) (chair)

2. I now know what people mean when they say, “cut air” first. The picture of the scrap MDF with the word "Anything“ on it had a burn hole on the end. Seems I have a problem comprehending + and – on the Z axis. (Yep, that big red STOP button sure comes in handy)
3. Be sure to remember what bit I use in Vcarve and try and mount same in router. (CNC With Romaxx) plus take your time to line up you scrap board with your axis.

I think I’m going to like this CNC stuff.

[cabnet636]

strongest looking unit i have seen in that size machine

off to bed here back in the am est
jim

[Chris D]

Hey Lovebugjunkie,

I see you have purchased one of the finest CNC routers available! I have studied that machine a lot and have emailed with the owner of the company so I am aware of the machine and the owner.

You hit the nail on the head with the comment about the cutoff saw and a hammer. My background is larger, metal cutting/grinding CNC machine tools, so that is my basis of comparison for all these small scale CNC machines. The more you look at the machine and its design, the more you realize it isn't the typical pile of parts you see from other router designers. Between the bigger, low cost router mfgs, and the guys that think they can sell an MDF router, they have done a remarkable job of giving CNC a bad name. It surely looks to me like most other mfgs. looked only at cost during design - make it cheap.

The Romaxx machine is at the opposite end of the spectrum when compared to all the other routers out there. Ron, the owner of Romaxx, did a truly remarkable job of designing, building, and bringing it to market at the price he is. When quality is factored in, there isn't a better value machine on the market.

It looks like your off to a good start with your entry into CNC routing - trust me, you are going to have a LOT OF FUN!

Chris

Jim
I first came across the CNCzone a few years ago and was amazed at what people had built/bought and the work they did with them. I was put off on the whole CNC idea as I thought I would never be able to pick it up. When Sears first started selling the compucarve I got interested again but for reasons you referred to I put off getting one. I was going to have only one crack at a cnc router and if it did not work out the banker (wife) would be a hard sell for another one. I purchased Vcarve pro last year to make sure I would be able to pick up that end of CNC and would be able to make something that would be more than shop vac full of sawdust. Two months of playing with it and I was committed to getting a CNC router.

The HS1 is ready to run out of the box, install your spindle hook up the cable(s) to your pc and your off. If I had known anything about Mach3 it would have taken me less then 15 minutes to have it moving.

I am very happy with the HS1. I was playing with it today trying to get me head round Mach3. It has a “massive” feel (not sure that is the correct word) for its size. Nothing on this machine makes you think it was an afterthought or add on to correct a design error or gives you the impression it was put together by someone that has a cut off saw and a big hammer and wants to make quick buck.

I was running it at 60 ipm today, (Ron provides conf files for 60,100,300 and 1200ipm. Nice touch for people like me that know zip about Mach3 and changing the configuration) I have it setting on a large table and it did not move. After I get more confidence in setting up with the correct work offsets will try 100 or 300.

When I created the part in Vcarve and loaded it into Mach3 I was also getting a bunch of circles with the part I loaded, had no idea why. Quick email to Ron and an even quicker reply and problem solved. Nice to have this type of customer service. (on a Saturday even)

And the old man learned a few things today.

1. The big red stop button is there for a reason. I drove the bit to the table. No real damage, the router was not powered on and I had it “loose” fit in the mount, (know idea those steppers had so much power) (chair)

2. I now know what people mean when they say, “cut air” first. The picture of the scrap MDF with the word "Anything“ on it had a burn hole on the end. Seems I have a problem comprehending + and – on the Z axis. (Yep, that big red STOP button sure comes in handy)
3. Be sure to remember what bit I use in Vcarve and try and mount same in router. (CNC With Romaxx) plus take your time to line up you scrap board with your axis.

I think I’m going to like this CNC stuff.

[lovebugjunkie]

Jim

Yes the handle/board and cut to catch water was cut out using a 1/8 straight .
(I messed up the cuts when I tried to take off the sharp edge with a hand sanding block.)

The "Hot Coffee" was done with one of the v-bits (60 degree I think) that came with the starter set from Centurion Tools.

Saw your web site.....Very nice work. I have seen what I thought was upper end woodwork in some high end houses that I put in phone systems for a contractor friend. Your work puts them to shame.

[cabnet636]

with guys like yourself who wire home cat 5 systems we do the theater cabinetry thank you for the compliment i try to stay grateful to the guys who work with me. i am new to cnc bought a carvewright in june and camaster in late november so i am happy to watch us all jim

i got bunches of corian/solid surface pieces in off fall where do you get yours

is controller cable in line so as to allow for a printer to be attached why two ports or is it a hand held controller
jim

[lovebugjunkie]

I picked up the corian on Ebay, guy was selling 12 (13.5 x 11.3/4 inch) for around $45-50 Its ¼ inch thick . (no idea if that was a good price or not)

I have done a little looking in the Houston area but so far just came up with some people that wanted to sell me their old counter top that they remove for way too much money for my use. Going to try and see if I can find installer in the Houston that will sell me some of his waste.

The extra cable is for the “Closed Loop” upgrade that Ron sells. He also sends the PCI card to put in the pc with it. Not sure if the MPG also uses it. Card comes with a driver CD to install on the pc, don’t over look it like I did. (Had to make a mad dash to the trash bin) beat the trash pickup guys by about 15 minutes.

I almost bypassed on the cast aluminum plate table, sure glad I did not. The predrilled ¼ x 20 threaded holes come in real handy.

[mgandy02]

Anyone interested in a good/efficient cyclone check out Bill's website on dust collection. He doesn't just talk about chip collection but fine harmful dust that is usually just blown around your shop.
http://billpentz.com/woodworking/cyclone/index.cfm

[cabnet636]

a lot of offall solid surface but after seeing your work i will probably carve in it

you also can find your local importer of metals (copper, stainless sheets and aluminimum) the pallets that some metals come from asia sometimes are mohogany and some great pieces and parts can be found this way

jim mcgrew

[Toysrme]

He said he had a clear vue, clear vue = bill pentz.:cheers:

[ger21]

clear vue = bill pentz.

Not really. ClearVue licences the design from Bill Pentz, but it's not Bill's company. Unless that's basically what you meant to say.

[cabnet636]

http://www.clearvuecyclones.com/

jim

[Toysrme]

clear vue touts bill pentz left and right and its long been information on bill pentz's personal website that they use some of his work.

clear vue = bill pentz.:cheers:

that's not a bad thing either aslong as they don't rest on bill's laurels


Back to the Romaxx, or atleast the most effective way to attach a cyclone dust collector with 6" piping to a Romaxx. LoL!

[igolfat8]

Glad to see your review on the Romaxx machine. I am really close to pulling the trigger on my first CNC machine and really like the looks of the Romaxx unit. It is just too small for my needs. However, after emailing Ron he said a larger machine is in the works which would suit my needs to a T.

On another topic, I have the Clear0vue mini cuyclone AND the 8' high MAX system in my shop. They are both simply outstanding tools that I would highly recommend!

[CNCZONERAMICO]

I have been looking at various CNC routers and features. Stumbled on this Romaxx machine, a couple nights ago, and liked what I saw for, maybe, the same reasons that some of you, talking about it, have.

My specific application and small business requires a machine that is efficient and acurate. I think roller v bearings on solid rails are fine and probably more maintenance free and less troublesome than some linear rails or rack and pinion setups. So I am going on what looks ligical, in my view. The Romaxx has some additional features that I like, the belt setup is somehting I have been giving a lot of thought, lately, and my reasoning and understanding for Ron using it on the Romaxx machine would be to achieve faster speeds. However until I try it I am still a bit skeptical on wether this will hold up precision when the tool encounters side loads. I don't need NASA precision but round holes down to 3/32" dia, done with a single 1/16" dia. cutter need to be round. WOuld like to hear some more imput, if anyone else is using this router and cutting beyond artistic designs, doing precision cutting, Id like to hear bout it, pehaps a video or pictures? Thanks.

[Robert Clément]

Hi,varv
I do the step yesterday and buy a WD Romaxx cnc.
I watch a few of your message and I is possible that you can help me when I will receive my machine.
I am a newbie, I like woodworking but never use a CNC for now...
I have Corel X3 but I do not know if it will be useful to make the gravure 2.5D?
You have now vcarv pro but you hope to buy Aspire... What you can do with Vcarv pro?
I buy the CNC only for hubby, I was reteired since october 2008.
Excuse my english, I am a french Canadian and I write poorly.
If you like to help me tell me, if you don't tell me too.

I hope receive your feedback.

Thanks,

Robert Clement

[lovebugjunkie]

Robert

Glad to help if I can.

On VcarvePro, It is the program I use to create my projects with.
Signs, 2.5 releaf and some wood parts. I also use it to cut out lighopanes I make in PhotoVcarve. If you are thinking about getting it or Aspire you can download a demo of the software from their site. It lets you cut out a few examples that are included with the software. http://www.vectric.com/WebSite/Vectr...s/download.htm

Check your private messages on this forum. I sent you a PM.

george


PS You will like the WD1,