I'm having problems finding the wiring diagram for
Slo-Syn 8 wire stepping motors. The part number on
the motor is M063-Le-507e. The label on the motor also specifies this: connect per 225373. Does anyone have any
wiring diagrams for these motors?
I'm having problems finding the wiring diagram for
Slo-Syn 8 wire stepping motors. The part number on
the motor is M063-Le-507e. The label on the motor also specifies this: connect per 225373. Does anyone have any
wiring diagrams for these motors?
Hi hornet, hope this helps.
This is a better, more informative one.
http://www.slosyn.com/manuals/SS2000MD7.pdf
Thanks for your help.... GrahamIT. I was wandering if you would know how to cross-reference my
wiring harness though.... I have these colored wires... Red, Brown, Yellow, Orange, White/brown,
White/red, White/yellow, White/orange, and chasis ground green.
WINDING COLOR CODE:Originally Posted by hornet
Winding 1 Yellow and white/yellow
Winding 2 Red and white/red
Winding 3 Brown and white/brown
Winding 4 Orange and white/orange
Wiring in Series:
Yellow A Phase
Red B Phase
Brown C Phase
Orange D Phase
white/yellow connects to white/red
white/brown connects to white/orange
Parallel:
Yellow connected to Red (A)
white/yellow connected to white/red (B)
Brown connected to Orange (C)
white/brown connected to white/orange (D)
GREEN IS CHASSIS GROUND CONNECTION.
Hope this helps.
Jerry
Sounds like you'll have to set to with an AVO meter and find out which pair of wires join to which coil, sorry I couldn't be more helpful.
Does anyone know how to connenct a SLO-SYN M063-CS09 ?
It has a 8 pin connector
Hi i have an 8 wire portescap disc magnet stepper motor and i dont know how to wire it and what to wire it too. Could you help please.
I figured out this method to identify any 8 wire motor. Hope it helps.
You will need an bi-polar driver that is set to spinning to work.
Identify leads on a 8 wire stepper motor « Dreamation Workshop