[myown]

Let's see that project and discuss it

[contactirfu]

does this use the UHU chip , I think not - U have your own program to run it and the schematic is to run it of direct 110V AC / 220v AC right?

impressive, tell us more

[myown]

((( DC ))) servo
and it works!!!

[contactirfu]

any pictures?

[HJozsi]

How about current limit? ...

[samco]

None that I see.

How about current limit? ...

[contactirfu]

oh i think "my own" doesn't want to discuss this!

[qazplm800]

Hi.... my own
your circuit and ATmega8 code is all test OK
thank .....

[Gunnar]

Hi myown!

Are you involved in this project, if so could you translate the tuningsoftware to english. I am not so good with russian,(not english either), and the project look interesting.

Gunnar

[mbosko]

Very nice to see code and schematic

Thanks a lot for share

Let us know for new versions v0.3 ...

[qazplm800]

ok

[kimdaihai]

ServoTunning – Hudognik, you can share source code ServoTunning ? my email [email protected] thank you

[cbcb128]

Please provide the Web address

[arisov77]

This not compatible with UHU controller. This improvement servodrive Elm Chan http://elm-chan.org/works/smc/report_e.html. Discussing the improvement goes in russian forum http://forum.rcdesign.ru/index.php?showtopic=40981.
Apropos on scheme there is errors ( HL1,H2 - LED, Anode VD16, VD19 to Gnd). The New variant of the scheme with checking the current and external amplifier photointerrupter here.

Excuse me for my bad English.

[qazplm800]

arisov77

Thanks a lot for share........

[jcdammeyer]

Please do not apologize for your English. There will always be people who can speak multiple languages and can help with translating. For example my Dutch writing is terrible and some Dutch people may laugh but I've never had anyone insult me for trying. I believe you will find the same here.

Thank you for posting comments about the project.

John Dammeyer
Automation Artisans Inc.

[cbcb128]

Can't log on elm-chan.org
Can translate that the ServoTuning.exe becomes English?

[arisov77]

That who produces itself(himself) for author ServoTunning – Hudognik does not answer, therefore the source code is not present. I only upgraded the scheme and a code under ATmega8. I send translation ServoTunnig (ScreenShot)

[Gunnar]

Hi arisov77!
Thank's for translating the software, and for helping with other translation. Your english is better then mine so i dont think you need to excuse for that. Try to find someone in outside your contry that speek and write your language.
Gunnar

[arisov77]

My version of PCB and PhotoPCB (without the protection of current site).

Moderator You can move the topic in the branch where discussing Elm Dc Servo Controller, for example, here http://www.cnczone.com/forums/forumdisplay.php?f=177? And change name of the subject, for example, «Russian variant Elm Dc Servo Controller». It is not UHU controller.