Originally Posted by
hecirp
The solid is a tear drop shaped fairing. BobCad21 generates toolpath which is correct.
BUT the Gcode generated has multiple lines having only a number and no other code. Mach3 will not accept those lines. When those lines are edited out, Mach 3 will mill the solid correctly, BUT only does one side (90 degrees) of the teardrop and stops.
Any idea what those lines are with number but no code (ie N250 6742)?
And why only one side of the solid is machined?
Any help would be appreciated,
Harvey Price
Harvey,
Can you post your G-Code file here???
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com