[Armech79]

G'Day all
We are to recieve a new VF-3YT in the next few weeks and while having some experience with the Haas controler on a TL-3B Lathe, this VMC will be something quite different I'm sure. Would apprieciate any tricks or tips for this machine. Cheers

[Doubleddaved]

We had ours now going on 4 months.My son (18 yrs old)who just started with our company and with no machining background at all is picking this up with no problem. I also love the new controller,I thought I wasn't going to as our VF8/50 that is one year old was different.When the tech did some repairs on our VF8 he upgraded the software to the same version as the VF3YT,so it makes it easier when I or my son go from machine to machine.And having the extended travel doesn't suck either 40"X26".
Dave

[Caue]

We are here for any doubts and I'm sure your local dealer also. Feel free to post any difficult about the control or send any drawings from the parts you need help about programing and tooling: [email protected]

Thank you all for choosing Haas Automation!!

[behindpropeller]

Setting 76....lock out the tool change button on the keypad.

[Mic6]

Setting 76....lock out the tool change button on the keypad.

+1000 2nd week of having out VF2, accidently hit the tool release button and watched the probe dive from the spindle:nono: into the table.

[ckirchen]

+1000 2nd week of having out VF2, accidently hit the tool release button and watched the probe dive from the spindle:nono: into the table.

I'd be interested to see how many machines that have setting 76 set to ON are because the operator dropped a tool. That's why mine is ON...

Setting 76 should be ON from the factory.

[hercules]

We had ours now going on 4 months.My son (18 yrs old)who just started with our company and with no machining background at all is picking this up with no problem. I also love the new controller,I thought I wasn't going to as our VF8/50 that is one year old was different.When the tech did some repairs on our VF8 he upgraded the software to the same version as the VF3YT,so it makes it easier when I or my son go from machine to machine.And having the extended travel doesn't suck either 40"X26".
Dave

Can I ask a follow up question? I have a TM-1 that I bought in December of 2007 and I just took delivery on a new TL-1 today. Before I ordered the TL-1 I asked about getting an update to the software on my mill so that the control systems would be similar and thus easier to switch back and forth between for operators. The answer I got is that it would cost around $5,500 to update the TM-1 even though it was only a year old.

You are saying that they just came and updated your older machine for free?

[tobyaxis]

G'Day all
We are to recieve a new VF-3YT in the next few weeks and while having some experience with the Haas controler on a TL-3B Lathe, this VMC will be something quite different I'm sure. Would apprieciate any tricks or tips for this machine. Cheers

This is a nice mill. Did you get the CAT40 or the CAT50??

[Caue]

Here is a list of all settings I use to change for my customers:

16 - Dry Run Lock Out - ON
Dry run feature can be dangerous if unproperly used. If you want to use it, so turn it OFF only for specific usage. Another point is that the key is beside Single Block one, so can be easily pressed not intentionally.

36 - Program Restart - ON
With this setting ON, whenever the cursor is positioned, machine will consider all features and function as if the cycle was ran since the beggining (including tool and offsets).

76 - Tool Release Lock Out - ON
Due to the reasons already explained by the friends.

101 - Feed Overide -> Rapid - ON
This way is easier an more safety to control positioning movements (G0), cause these will be controled the same way than feeding movements (by Jog Handle - and with 0 value available)

162 - Default To Float - ON
Safety is never too much, and now there's no risk to ignore decimal point for integer values in CNC programs (much common in metric operation, but also useful for inches)

That's all, folks. I hope it can be useful for you!

[Armech79]

This is a nice mill. Did you get the CAT40 or the CAT50??

We thought about the 50 but it ended up bieng slightly out of our price range. I think the 40 will cover 90% of our work and we will sub out the rest.

[Armech79]

Thanks to all the replies on the VF-3YT, I will sort out those settings for sure.
We have FeatureCAM to go with it, this should be good yeh?

[HelicopterJohn]

hercules,

What version of software are you running and do you have the coldfire processor?

I just visited my HFO yesterday and asked that question of their applications engineer. I told him my machine was built in late 2007 and delivered the first week of 2008 and had the new LCD screen and version M15 05 B software.

He told me that I could run the new software and it would take all of about 15 minutes to install it.

Also, I checked with the HAAS Factory some time back and they also told me that my machine TM-1P with the version M15 05 B software was capable of running the new version 16 software.

If you have that version of software you might want to give the factory a call to confirm what I have told you. If you have the correct version of software and the necessary hardware coldfired processer you should be able to run the new software.

Then it depends on how much your HFO wants to charge you for the 15 minute change over.

Last year they had a couple of issues with the change over process, but it is my understanding now that the conversion should work well.

Just some information that may be of help.

John

[Armech79]

hercules,

What version of software are you running and do you have the coldfire processor?

I just visited my HFO yesterday and asked that question of their applications engineer. I told him my machine was built in late 2007 and delivered the first week of 2008 and had the new LCD screen and version M15 05 B software.

He told me that I could run the new software and it would take all of about 15 minutes to install it.

Also, I checked with the HAAS Factory some time back and they also told me that my machine TM-1P with the version M15 05 B software was capable of running the new version 16 software.

If you have that version of software you might want to give the factory a call to confirm what I have told you. If you have the correct version of software and the necessary hardware coldfired processer you should be able to run the new software.

Then it depends on how much your HFO wants to charge you for the 15 minute change over.

Last year they had a couple of issues with the change over process, but it is my understanding now that the conversion should work well.

Just some information that may be of help.

John

G'Day John, Checked with the dealer and we have the new version 16 and coldfire processor with new LCD screen. Sounds good to me! I'd say we're ready to roll.

[hercules]

hercules,

What version of software are you running and do you have the coldfire processor?

I just visited my HFO yesterday and asked that question of their applications engineer. I told him my machine was built in late 2007 and delivered the first week of 2008 and had the new LCD screen and version M15 05 B software.

He told me that I could run the new software and it would take all of about 15 minutes to install it.

Also, I checked with the HAAS Factory some time back and they also told me that my machine TM-1P with the version M15 05 B software was capable of running the new version 16 software.

If you have that version of software you might want to give the factory a call to confirm what I have told you. If you have the correct version of software and the necessary hardware coldfired processer you should be able to run the new software.

Then it depends on how much your HFO wants to charge you for the 15 minute change over.

Last year they had a couple of issues with the change over process, but it is my understanding now that the conversion should work well.

Just some information that may be of help.

John

Thanks for replying John. I will check the software version. I do remeber reading on this board when you got your mill. I think you got yours a few weeks before I got mine so I would assume the software versions are similar.

[awesome83]

To have your software updated from 15 to 16 series software does only take 15 minutes if you have enough Flash memory on your processor. The 16 series software requires 16 meg of Flash and some machines with 15 series dont have enough memory (8megs) so it really depends on when Haas switched to the larger processor memory.

[t.lewis]

2007 TM-2 had to upgrade main board to get more memory. version 16.04 software and i don't like it as well for probing.

[Caue]

What is your issue about probing?? Maqybe we can help you to settle it...
Cheers!

[tobyaxis]

Any word on delivery yet??

[t.lewis]

Upgraded software from version 15.? and it was simple to run. with the new version 16.4 you have to create a program , exit VQC into MDI then run program. then if you want to set tool length you have to create new or insert into existing program. then your left with programs on the machine that you have to delete or let build up. in the old software you picked your probeing cycle entered your values and off you went from the VQC screen. It's new and I use to the old way. It may just take time. We upgraded software so we were running the same on our TL-2 (2009)and TM-2(2007) Wish they would come out with a book on new softwear this big.