Would like to make a single .063" cut (all the way through) in 5052 aluminum sheet. For best tool life what ballpark numbers am i lookin at?
G wizard is telling me:
cut depth: .063"
cut width: .125"
RPM (24,000)
Feed rate: 36IPM
Surface speed: 785
chipload .0015
deflection .0012"
horsepower: .0227
MRR (CI) .2835
What is the proper chipload? Most likely bendable aluminum like 5052. I still need to hook up my koolmist system and air blaster.
Thanks for the help.