Hello,
I’d like to know what I should pay attention with a second-hand Chiron FZ12 to. Except for good working… axes are ok
Thanks
Hello,
I’d like to know what I should pay attention with a second-hand Chiron FZ12 to. Except for good working… axes are ok
Thanks
Wissen ist das einzige Gut das sich vermehrt, wenn man es teilt.
If it has a cage changer, then you should test its mechanics for abrasion.
The repair of the details can be very expensive.
Regards
apple
the same for double gripper with chain magazine
regards
Florian
Hello,
Check up the air hoses, sometimes they mellow and become inflexible.
If there’s a tilting table, then you should pay attention to dashpot on the left and right under the table. It certainly depends on how much time you have for the viewing.
Generally speaking these machines are good.
It’s very important if the previous owner has cared about attendance.
Regards chrigul
Hello,
thanks for your tips. That’s exactly what I mean. The small things that one doesn’t immediately think about.
Super! Thanks!
4runner
Wissen ist das einzige Gut das sich vermehrt, wenn man es teilt.
Hands off from the SK30 achievement. It’s only for boring.
Check the Z-axis for perpendicularity.
Besides check the sundry air hoses.
Hi,
Hands off from sk30 is nonsense. I mill with sk 30 milling head from hoffmann with 3000 u/min in steel feed is 4000!!!
Unfortunately not more, cutting depth 0,5 mm
Before you make such statements, you should clarify with old tools…
Regards
L-Tec
What cutter and what material do you use exactly?