Originally Posted by
popspipes
Mike, Steve,
I have checked for loose fasteners etc, now that I think about it, 6 years of making the same small parts with a 3d hole in the center that takes37 to 62 passes roughing, the same for finishing times a thousand or so pieces could be the reason for the bit of backlash possibly??
I have approx .0024 backlash in the Y, I only notice the abrupt start stop in the pocket probing routine. I need to move some shelving to get at the Y stepper area, so it may take awhile before anything gets done......................
thanks for all the suggestions!