This is a good idea for sharing...working on that.
This is a good idea for sharing...working on that.
I'm trying to find one too. Let me know if you have any luck
I see you are having a hard time posting pictures or files, perhaps this will help.:banana::banana::banana:
Directly under the Quick Reply box are some tabs, click the Go Advanced tab.
Next you will scroll down to the Additional Options box, there you will see a Manage Attachments inside a box, click on it.
A small window will pop up where you can choose the file or picture you can upload. You are limited to file type and SIZE. (As an example I tried to upload a DXF file and got this - - Your file of 825.9 KB bytes exceeds the forum's limit of 500.0 KB for this filetype.) You will get a notice only after you have chosen all the files and clicked on the UPLOAD tab. If the file size and type are OK to post they will be placed in your post and you can preview how the post will look using the tab at the lower right of the window our post is in. If you are satisfied with what you see you can then click the Submit Reply, or you can continue editing your post and previewing it until it's just the way you want it and then Submit Reply.
I hope this helps anybody that has problems with posting.
can anyone help, my system can bring them in but the qualitity is shocking
thanks in advance
brook
Here's my try at the elephant but the clock face will not come out for me.
I just got a 6040 CNC, I have been learning a lot on this site. I have grabbed several DXFs from here. This is how they turned out.
As a follow up to my previous post, I was hoping I might be able to get some help with a couple conversions. I am just starting with inkscape and I need to watch some tutorials. on making these conversions. Until I get better at it here are the pics I'd like to convert. If the pics wont work I can look for better ones. Thank you in advance
Looks like you have a laser and a router set up on it, very nice work! Next one you should do is the mayan calendar.
Larry
No laser, just a router. I used a dark stain and left some in the cuts longer.
I’m search of a good Clemson Tiger DXF file to try and run. Thanks for any help!
These are patches from my dads Navy service. He has ship reunions coming up and I am hoping to make some plaques for him to take along to give as door prize / auction items to fund future reunions. I want to do this stuff my self but currently my skill level does not allow it, so if you have any recommendations for tutorials on using inkscape or other software to take pics and make dxfs I'd love to know about it. In the mean time if any one can take a stab at converting some of these I would be most appreciative. I seem to have the cutting down, but need to work on my creation skills.
Thanks. I'll look in to it. I am having a lot of fun making things other people have created, I cant wait to make some of my own to share. If any of you guys have a moment to look at the patches i posted above and see if they can be converted or if i need better pics I'd be glad to have the help.
Thanks much appreciated
can anyone make me a DXF file for this name as it appears on the image " ANAHI'
SIZE can be 25 inch x 10 inch
Please try the attached
nivlek I tried opening the DXF and the DWG and nothing comes up its blank
Please try this one ?