hello every body
im trying to build my own cnc router machine
so please tell me what is the bset stepper motor i can use for my cnc router ?
+ my machine dimension will be about 160 * 100
+ i will use my router for cut wood and mybe for glass too
hello every body
im trying to build my own cnc router machine
so please tell me what is the bset stepper motor i can use for my cnc router ?
+ my machine dimension will be about 160 * 100
+ i will use my router for cut wood and mybe for glass too
read steppers and servos at http://cnczone.com/forums/showthread.php?t=17419
bigger is better; if you pick small motors you must make very shallow cuts at slow
speeds that take a very long time.
robotic regards,
Tom
= = = = =
"I can write better than anybody
who can write faster, and I can
write faster than anybody who
can write better."
- - A. J. Liebling
Someone can recommend us some stepper motor model for a 1,60 * 1,00 machine?
Thanks!!
check this out.
Stepper Motor
160CMX100cm????
Thanks KOC62! (Y)...
Yes David, 160cmX100cm. I need to make a prototype of a laser cutter for a textile company.
Thanks in advance for your help.
I have a size 160X90cm dimension laser cutting machine(I think the size is just like your machine) and i also used for cutting textile ,the efficiency is good.and we use three phase stepper motor, the Model is 24HC3301-05,because i am chinese ,so the stepper model made in china,the price is about 55$ for export ,if you need ,i can help you connact with the factory,