skullworks you don't happen to be from Colorado do you?
Mike
skullworks you don't happen to be from Colorado do you?
Mike
No greater love can a man have than this, that he give his life for a friend.
Your initials L.D.? Have you ever seen beautiful wood thumbhole stocks for the AR rifles?
No greater love can a man have than this, that he give his life for a friend.
Sorry, No I'm not L.D.
I have seen a few custom wood sets for AR's. Some of the nicest was done by a stock maker in South Korea who was trying to break in to the U.S. market.
I haven't seen the SK ones, but if you ever saw any on RND guns, and those on the JP Enterprises, you have seen my work. Wildest I did for RND was a highly figured curly maple with a purple dye and high polish finish.
Mike
No greater love can a man have than this, that he give his life for a friend.
Does anyone have a AR-15 bolt CAD file or have the spring dimensions???
to the OP, this should be all you need to finish up your lower;
http://arlower.ray-vin.com/ar15/
they also have CAD models for those of you looking for them.
Ray is active in many areas;
CNC
Casting
And shooting sports
His Name is posted right on the cover
http://arlower.ray-vin.com/ar15/chapter00.pdf
And one of he steam engine pages is here;
http://www.foundry.ray-vin.com/woodson/47/woodson.htm
http://www.youtube.com/v/5x82mEiH7_k&hl=en&fs=1&
does anyone know of any special tooling to machine a raw block into a ar15 lower. i dont know anything on the subject and im looking for info thank you
I'm looking for the logo with the horse that's on the side of the receiver in dxf format if anyone's got it..please
What program do you use for designs new to engraving but want to start engraving some of my lower receivers
Charles
Sent from my iPhone using Tapatalk
We machine Ar 15 and Ar 10 lowers 5 days a week from billet 7075. We Use 3 set ups. 1 vise wiith parallels and another vise with a custom Jig and a 4th axis on another machine to machine the magwell and trigger pocket and buffer at 1 time. Attachment 257756Attachment 257756 i dont mind helping advise but cant share program files due to patent pending
Sorry Guys i have been very very busy and lost my cnc zone password. The engraving was programed in GiBBS cam and i despise Gibbs Cam and run on a Fadal VMC 4020 cycle time for that is about 9 mi. The Magwell is NOT BROACHED, there is a better way. (1/8) 6 inch air craft drill and drill the corners and 2 holes .750 in the middle of the magwell and then a 3/16 carbide end mill and machine it out. this method keeps the corners sharp.
As far as the profile is done we start with a 2 x 5 billet block 9 inches long and us a 2 inch shell mill to profile and deck the part off running around 9000rpm at around 250 inches a minute. along with a couple of 1/2 carbide 2 loc endmills and 1 5/16 ball nose end mill.
sorry i have been MIA for a while.
Does anyone know where I can get a CAD drawing of an AR10. I am finishing a 80% and will be importing it into Fusion 360.
Sent from my XT1635-01 using Tapatalk
cncgunsmithing.com has that info.
billyjack
Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)