[Dixieplastics]

Newbie here.
I got a deal on 2 arrows a couple of years ago. I have a small shop and only used one. The other was setup and checked out by me to make sure it was functional. But I didn't use it other than to start it up every so often for the first year. Machine in question is arrow 1000 a2100 98 year model
I had a surge come in from the power company. Blew out an nc lathe and a computer. It MAY have caused this. The machine was off when this occured. Unless power came in on ground I wouldn't expect this machine would have been damaged. Machine had been off for like 4 months. Maybe batteries dead?
I tried to upload a picture of the error code. Lets see if it will be legible. It looks like the photo went from 500 to 62 kb.
I'm in central VA. Is there anyone somewhat local that could come in and check it out? I've tried several people but no one seems to know much about Cincinnatis.
Any help is greatly appreciated.